B101D
Electronic Control Unit Hardware Malfunction
What it means
B101D. Electronic Control Unit Hardware Malfunction. This Chevy-enhanced code applies to Silverado, Sierra, Tahoe, Suburban, Impala, Malibu, Corvette, Escalade.
Findings, check these first
- Internal hardware fault in the OnStar vehicle communication interface module (VCIM)
- Extreme low-voltage or dead-battery event falsely setting B101D F0 in the BCM
- Internal memory or checksum failure inside the electronic control unit
- Water intrusion or corroded connector at the module
Standard procedure
- Read the symptom byte with a Tech2 or GDS2 to identify the failing internal circuit
- Clear the code first; if B101D F0 clears with no symptoms, do not replace the module
- Check battery condition and charging system output before condemning any module
- Inspect module connectors for moisture and corrosion
- Replace the affected module only if the code resets as current with good voltage and wiring
Look up another code
Press / to jump to the box. Chevy-enhanced powertrain, body, chassis and network codes.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-25.
Report a correction for B101D. Include your vehicle, the issue and a source if you have one.