P1761
Up And Down Shift Switch Signal Circuit
What it means
P1761. Up And Down Shift Switch Signal Circuit. This Chevy-enhanced code applies to Avalanche, Silverado, Tahoe, Malibu, Traverse.
Findings, check these first
- Driver shift control TAP switch failure in the shift lever assembly
- Rolling-count mismatch between the BCM and the TCM on the TAP signal
- Corroded shift lever switch connector from spilled drinks
- Internal TCM fault in the control solenoid valve assembly
Standard procedure
- Verify TAP up and downshift operation responds on a Tech2 or GDS2
- Inspect the shift lever switch and connector for damage or contamination
- Check BCM to TCM serial data integrity since the fault is a rolling-count error
- Rule out companion U-codes before condemning the solenoid valve assembly
- Service the control solenoid valve assembly only after external circuits prove good
Look up another code
Press / to jump to the box. Chevy-enhanced powertrain, body, chassis and network codes.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-19.
Report a correction for P1761. Include your vehicle, the issue and a source if you have one.