P1810
Transmission Fluid Pressure Manual Valve Position Switch Circuit
What it means
P1810. Transmission Fluid Pressure Manual Valve Position Switch Circuit. This Chevy-enhanced code applies to Silverado, Sierra, Tahoe, Yukon, Impala, Malibu.
Findings, check these first
- Faulty TFP manual valve position switch assembly on the valve body
- Open or short in the TFP switch signal circuits
- Corroded AT inline 20-way connector
- Internal transmission harness shorted together or to ground
- Low or contaminated transmission fluid skewing switch readings
Standard procedure
- Compare scan tool TFP switch range against the shifter position with a Tech2 scan tool
- Disconnect the AT inline connector and verify all TFP signals read HI
- Jumper each TFP signal to ground and confirm the scan tool reads LOW
- Test signal circuits for opens, shorts to ground, and shorts between circuits
- Replace the TFP switch assembly if circuits test normal, then clear and verify
Look up another code
Press / to jump to the box. Chevy-enhanced powertrain, body, chassis and network codes.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-13.
Report a correction for P1810. Include your vehicle, the issue and a source if you have one.