P1220
Throttle Position (TP) Sensor 2 Circuit
What it means
P1220. Throttle Position (TP) Sensor 2 Circuit. This Chevy-enhanced code applies to Silverado, Sierra, Tahoe, Yukon, Escalade.
Findings, check these first
- Failed TP Sensor 2 element inside the throttle body
- Bent pins in the throttle body connector
- TP Sensor 2 signal wire open or shorted
- Moisture-corroded throttle actuator terminals
- Mismatched throttle body and PCM calibration after a swap
Standard procedure
- Read TP Sensor 1 versus TP Sensor 2 correlation on a Tech2 or GDS2
- Inspect throttle body connector pins for bends or push-out
- Test the TP Sensor 2 circuit for opens and shorts to ground
- Verify the throttle body part number matches the vehicle calibration
- Replace the throttle body and perform the idle learn only after circuit tests pass
Look up another code
Press / to jump to the box. Chevy-enhanced powertrain, body, chassis and network codes.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-13.
Report a correction for P1220. Include your vehicle, the issue and a source if you have one.