P1271
Accelerator Pedal Position (APP) Sensor 1-2 Correlation
What it means
P1271. Accelerator Pedal Position (APP) Sensor 1-2 Correlation. This Chevy-enhanced code applies to Silverado, Sierra, Tahoe, Suburban, Yukon.
Findings, check these first
- Worn accelerator pedal assembly with disagreeing sensors
- Stretched or binding throttle cable on cable-actuated pedals
- Corroded APP connector under the dash
- Floor mat or debris jamming pedal travel
- Low 5V reference affecting one APP sensor
Standard procedure
- Graph APP Sensor 1 versus APP Sensor 2 on a Tech2 or GDS2 through full travel
- Inspect pedal travel for binding, mats, or debris
- Check the APP connector for corrosion and terminal tension
- Test both 5V references and grounds at the pedal connector
- Replace the pedal assembly only if correlation fails with good wiring, then clear and relearn
Look up another code
Press / to jump to the box. Chevy-enhanced powertrain, body, chassis and network codes.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-13.
Report a correction for P1271. Include your vehicle, the issue and a source if you have one.