P1275
Accelerator Pedal Position (APP) Sensor 1 Circuit
What it means
P1275. Accelerator Pedal Position (APP) Sensor 1 Circuit. This Chevy-enhanced code applies to Silverado, Sierra, Tahoe, Suburban, Avalanche.
Findings, check these first
- Failed APP Sensor 1 element in the pedal assembly
- Open or shorted APP Sensor 1 signal wire
- Loose APP connector under the instrument panel
- Water leak dripping onto the APP connector
- PCM 5V reference 1 circuit fault
Standard procedure
- Monitor APP Sensor 1 voltage sweep on a Tech2 or GDS2
- Inspect the APP connector for moisture from windshield or cowl leaks
- Test the APP Sensor 1 signal, reference, and ground circuits end to end
- Wiggle-test the dash harness while holding steady pedal
- Replace the pedal assembly only after circuit tests pass, then clear and verify sweep
Look up another code
Press / to jump to the box. Chevy-enhanced powertrain, body, chassis and network codes.
Sources and review
Review: no source links are recorded for this entry.
Last updated 2026-09-13.
Report a correction for P1275. Include your vehicle, the issue and a source if you have one.